Kalekim Grout Grey 5kg

Stock Code: 2500
£10.00 inc VAT Each

Availability: In Stock for Despatch

Quantity:
-
+

High performance (high resistance to abrasion and reduced water absorption), cementitious, silicone enhanced, fungee and yeast resistant grout for 2 to 20 mm joints

Features

  • Grouting interior and exterior floor and wall in all types and sizes of ceramic tiles, granite, cotto, clinker, glass mosaics, marble, natural stone for
    2-20 mm joints.
  • Grouting wet places like swimming pools, water tanks.
  • Grouting places where sudden temperature changes and heavy traffic exist like facades, terraces, over floor heating installations, warehouses.
  • Floor and wall grouting of places like bathrooms, showers, balconies and kitchens

Properties

  • Less prone to dirtiness, easy to clean.
  • Low water absorption with water reppellency.
  • Resistant to fungee&yeast growth.
  • Approved to be used in contact with water intended for human consumption.
  • Low shrinkage, therefore absence of cracks and fissures.
  • Very good abrasion resistance.
  • Good compressive and flexural strength and good resistance to freeze/thaw cycles.
  • Fast curing.
  • A smooth final surface.
  • Low water absorption.
  • Ultra-violet and atmosphere resistant 14 different colours.
  • ULTRAFUGA FLEX TOZUMAZ is user friendly with dust-free technology

Warnings

  • Since contains cement, irritating to eyes, respiratory system and skin. For further information refer to safety data sheet.

Storage

  • Store in dry medium. Do not stack more than 10 bags on top of each other.

 

**images for illustrative purposes only - please refer to description and specification for full details of product

Part NoGROUTG
AppearanceWhite and coloured powder
Shelf Life12 months when stored in the original sealed packing in dry place
Application Temperature Range(+5°C)-(+35°C)
Mixing Ratio4.8-5.4 lt water / 20 kg powder
Mixing Ratio.1.2-1.35 lt water / 5 kg powder
Pot Life30 minutes
Set to Light Traffic1 day
ConsumptionSee consumption table depending on width of the joints and dimensions of the tile
Flexural Strength (EN 12808-3)2.5 N/mm²
Compressive Strength (EN 12808-3)15 N/mm²
Flexural Strength (after freze/thaw cycles) (EN 12808-3)2.5 N/mm²
Compressive Strength (after freze/thaw cycles) (EN 12808-3)15 N/mm²
Abrasion Resistance (EN 12808-2)1000 mm³
Shrinkage (EN-12808-4)3 mm / m
Water Absorption after (30 min / 4 hours) (EN 12808-5) 2 g / = 5 g
Service Temperature Range (after final cure)(-30°C)-(+80°C)

There are no downloads for this product.

There are no reviews for this product yet. Be the first to add one!