It normally isn't very difficult to hold two pieces of material together but if I asked you do such a thing, what tool you would use to do that? Would you have a solution for me? These are the WellCut clamp ranges along with my top 4 tips to temporarily secure material together.
Top 4 Tips For Securing Material with Clamps:
1. Use scrap wood where possible between your material and the clamps jaws to prevent damaging your material part.
2. Secure your clamp to the material perpendicularly to prevent slippage and to allow a secure load of pressure.
3. Use two clamps were possible to provide equal levels of pressure when securing material.
4. Prevent from over-tightening the clamp as this will damage your material and damage the clamp in the long run.
WellCut WC-PJ9560 Adjustable 95 x 600 Parallel Clamp
"Easy to use, twisting handle clamp. Simple and does the job." – Alex Knocks
 |
 |
 |
| Manual Twist Clamp Tightening This clamp features manual twist tightening that ensures you do not over-tighten. Designed to tighten till no more pressure can be applied. |
Easily Clamps To Any Material You will find this clamp series makes joining materials very simple. Allowing you to continue with other tasks while your clamps do the work. |
Quality Clamping |
The Parallel Jaw RICA-Series is a new product from the WELLCUT brand. Coming in 3 different sizes, 95x600/ 95x800/ 95x1000, the powerful Parallel Clamps RICA-series has unique features not found in most clamps. The clamping force is up to 600kg, making it one of the best in the market and the clamps are made from premium steel.
Special Features
- High Quality - Made from premium steel material making it durable and slip-proof.
- Accuracy - Fully adjustable. The clamps are designed for precision and power with exact 90 degrees clamping.
- Clamp Force - Has a clamp force of up to 600kg pressure.
- Multi-Function - These easy to use clamps include movable jaws that can be reversed and used as spreaders.
- Comfort Grip - The grip is made from 2 high quality component plastic handles.
| Sizes | Where to buy |
| 95 x 600 mm | Buy Here |
| 95 x 800 mm | Buy Here |
| 95 x 1000 mm | Buy Here |
WellCut Flip-Series Quick Grip Clamp
"This was the largest F-Bar clamp I could get my hands on."– Aaron Obsourne
 |
 |
 |
| Trigger Clamp This clamp range features a trigger that allows you too easily tighten the clamp until you secure the material you are working with. |
Easily Clamps To Any Material You will find this clamp series makes joining materials very simple. Continue with other tasks while your clamps do the work. |
Quick-Flip Feature Allows you to flip the clamp upside down or at a 90-degree angle to reach smaller confined spaces when assembling. |
The Quick-Flip series made by WellCut offers a range of sizes coming in 60x150/60x300/60x450. These clamps offer an impressive 70kg of clamping pressure to your chosen material. These clamps are ideal for smaller pieces in confined spaces whilst assembling, glueing wood materials of joining other materials together. The ergonomic design enables you to quickly flip the clamps upside down and apply them to hard to get areas. Easy to use with a comfortable handle, a squeeze trigger allows you to ratchet the material to fit together tightly. To loosen simply usethe quick-release button. This product also features anti-scratch clamping pads that will reduce damaging of scratching the surface of your material.
Special Features
- ERGONOMIC DESIGN - Allows you to quickly apply pressure to materials with the handy trigger handle and quick-release button
- QUICK FLIP - Use this clamp either as a conventional clamping device or use this as a spreader. Either works for clamping or separating materials.
- HIGH QUALITY - Designed from premium S2 steel making it durable and slip-proof when clamped to materials.
- ANTI-SCRATCH - Designed with rubber clamp jaws to minimize any scratches or pressure marks that could appear onto your material.
- CLAMPING FORCE - Has a clamping force of up to 70kg of pressure
| Sizes | Where to Buy |
| 60 x 150 mm | Buy Here |
| 60 x 300 mm | Buy Here |
| 60 x 450 mm | Buy Here |
WellCut F-Bar Wood Working Clamp
"WellCut make the best hand tool products on the market! Love the tools, never failed on me!"– Jeremy Knwoles
 |
 |
 |
| Non-Slip Material Clamp tips ensure you don't slip against or damage your material. |
Manual Tightening This clamp range features a twist-tightening grip that applys an impressive 320kg of pressure. |
Direct Clamping Pressure Allows you to select a specific point on your material to direct pressure. |
The F-Style clamps are a new product from the WELLCUT Clamps brand. Coming in 3 different sizes, 120x400 /120x600 /120x800, the F-Type series has unique features not found in most clamps. The clamping force always keeps the right pressure up to 320 kg.
Special Features
- High Quality - Made from premium steel material making it durable and slip-proof.
- Clamp Force - Has a clamp force of up to320kg pressure.
- Non-Slip Mechanism - The large flat rail is separated to prevent slipping. The design holds the arm in place for better clamping pressure.
- Anti-Scratch - The plastic cap feature reduces the amount of damage or scratching of the surface.
- Ergonomic Design - This clamp is extremely comfortable, has an easy-to-use grip, a squeeze trigger, and provides a more torque effect for better gripping power.
| Sizes | Where to buy |
| 50 x 150 mm | Buy Here |
| 80 x 250mm | Buy Here |
| 50 x 200 mm | Buy Here |
| 120 x 800 mm | Buy Here |
| 120 x 600 mm | Buy Here |
| 120 x 400 mm | Buy Here |
 |
WellCut® offer an innovative and comprehensive product range of power tool accessories, hand tools and many more professional tools, which offer an exceptional solution for professionals as well for handymen. WellCut® represents market leading industry standards, providing top products with top service in one click with end-to-end customer's support. |
