Makita 18V LXT 9 Piece Cordless Power Tool Kit with 4 x 5.0Ah Batteries, Charger & Tool Bag

DGA900Z Angle Grinder:

• Brushless motor
• Electronic current limiter
• Soft Start
• Anti-restart function
• Electric brake
• Active Feedback Sensing Technology (AFT): Shuts down the tool to protect the user if the rotation speed suddenly slows down
• Automatic Torque Drive Technology (ADT): Automatically changes the cutting speed according to load conditions for optimum operation

DTM52Z Multi Tool:

• Variable speed control
• Brushless motor
• Soft start
• Constant speed control
• LED job light
• Tool-less accessory clamp
• Anti-vibration technology
• Easy-to-grip small diameter body
• Works with STARLOCK, STARLOCK PLUS and STARLOCK MAX accessories

DHP481Z Combi Drill:

• Durable build: The efficient brushless motor means a longer tool life and longer-lasting battery charge. Thanks to Makita's Extreme Protection Technology (XPT), the DHP481Z resists dust and drips.
• High performance: Drilling diameter in steel: 13mm; drilling diameter in wood: 76mm; drilling diameter in masonry: 16mm.
• Versatile function: The Makita DHP481Z has 3 combi drill modes: regular drill, hammer drill, drill driver mode for fastening and unfastening, plus 21 adjustable torque settings + drill. The drill also has forward and reverse rotation so that you can embed screws and remove them.
• Ergonomic design: This hammer drill has the best possible ergonomic handle for drill-driver applications. Desite the impressive 115Nm of torque, the vibration K factor is just 1.5m/sec².

DTD154Z Impact Driver:

• T-mode: Tightening mode for self-drilling screw
• Electronic 3-stage impact power selection (Hard/Medium/Soft)
• Brushless motor
• One touch sliding chuck for easy bit installation and removal.
• LED job light
• Ergonomic soft grip
• Electric brake
• Variable speed control by trigger
• Forward/reverse rotation

DHR242Z SDS Drill:

• Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200
• One touch slide chuck for SDS-plus bit
• Easy-to-grip handle
• Ergonomically designed to give maximum power thrust
• Provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
• 3 mode operation: Rotation + Hammering, Hammering only & Rotation only
• The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
• High productivity achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges

DHS680Z Circular Saw:

• Automatic Speed Control: Automatically changes the cutting speed according to load condition for optimum operation
• Electric brake
• Soft start
• Electronic current limiter for overload protection.
• Tool Hanger
• Twin LED job light
• Battery fuel gauge
• Rear dust exhaust port
• Large lock off lever.
• Compact and lightweight design

DJV181Z Jigsaw:

• First barrel handle type cordless jigsaw powered by Li-ion battery.
• Brushless motor.
• Rigid aluminium base bevels 0 to 45 degrees left and right.
• Change lever for 3 orbital settings and straight cutting.
• Tool-less blade change.
• Variable speed control dial.
• Soft start feature.
• "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body.
• Blower function to clear wood dust from cutting line.
• Twin LED job light

DJR187Z Reciprocating Saw:

• Brushless motor
• Electronic 2-speed selection.
• Tool-less blade change
• Lock-off lever
• Electric brake
• Variable speed control by trigger
• LED job light
• High power
• Newly designed crank mechanism for higher efficiency

Product Specifications:

DGA900Z Angle Grinder:

• Wheel Diameter: 230 mm
• Bore Diameter: 22.23 mm
• Max Wheel Thickness: 6.5 mm
• No Load Speed: 6,000 rpm
• Switch Type: Trigger Switch "Paddle" Style

DTM52Z Multi Tool:

• Voltage: 18v LXT
• Shank: STARLOCK MAX
• Oscillation Angle: 3.6 degrees
• Oscillations per Minute: 10,000 - 20,000
• Maximum Output: 370 w

DHP481Z Combi Drill:

• Torque Settings: 21 + drill
• Chuck Capacity: 1.5 - 13 mm
• No Load Speed (Hi): 0 - 2100 rpm
• No Load Speed (Lo): 0 - 550 rpm
• Vibration K factor: 1.5 m/sec²
• Max. in wood: 76mm
• Max. in masonry: 16mm
• Max. in steel: 13mm

DTD154Z Impact Driver:

• Machine Screw: M4-M8
• Driving Shank: 6.35mm (1/4") Hex
• Standard Bolt: M5-M16
• High Tensile Bolt: M5-M14
• Coarse Thread: 22 - 125 mm

DHR242Z SDS Drill:

• Max in Steel: 13mm
• Max in Wood: 27mm
• Max in Concrete: 24mm
• No Load Speed: 0-950rpm
• Blows per minute: 0-4,700bpm
• Single impact energy: 2.0J

DHS680Z Circular Saw:

• Voltage: 18V
• No Load Speed: 5,000rpm
• Blade Diameter: 165mm
• Bore Size: 20mm
• Power Output: 680w

DJV181Z Jigsaw:

• Stroke Length: 26 mm
• Max. Cutting Capacity at 90° (Wood): 135 mm
• Max. Cutting Capacity at 90° (Steel): 10 mm
• Max. Cutting Capacity at 90° (Aluminm): 20 mm
• Strokes per Minute: 800 - 3,500 spm

DJR187Z Reciprocating Saw:

• Strokes per Minute (Hi): 0 - 3,000
• Strokes per Minute (Lo): 0 - 2,300 spm
• Capacity in Wood: 255 mm
• Capacity in Mild Steel Pipe: 130 mm
• Stroke Length: 32 mm
• Overall Length: 439 mm