Makita DLX2590TJ 18V LXT Cordless Brushless Combi Drill & Impact Wrench Twin Pack With 2 x 5Ah Batteries, Charger & Case

DHP492Z Combi Drill

• Highly efficient and compact machine for professional use
• LED light illuminates the work site
• Battery protection system automatically shuts off power when the battery level is low
• Electronic overload protection protects the user and the device
• Keyless chuck for easy bit installation and removal
• Compact and lightweight for reduced operator fatigue
• Electric brake for maximum productivity and increased operator safety

DTW300Z Impact Wrench

• Brushless motor: The brushless design on this brushless wrench’s motor means that it continuously offers frictionless performance with little to no maintenance. This wrench’s motor has a smaller number of moving parts, giving it the advantage of a more compact design.
• Electric brake: The 18v brushless wrench has an electronic brake control, so the motor will stop and cut out as soon as the trigger is released. This allows the power tool user to have complete control when on the job.
• Variable speed trigger: The Makita cordless wrench has a large switch and dial that allows you to have complete control of the tool thanks to its variable speed, allowing you to adjust the speed depending on the task at hand.
• Forward/reverse rotation: The forward/reverse rotation on this compact impact wrench allows you to either embed or remove screws this optimizes how you use this tool making it very easy to operate.
• LED job light: The LED job light on this Makita power tool has an afterglow function, so you can safely see your work during and after drilling. This LED joblight has both pre glow and afterglow functions.
• Electronic 4 stage impact power selection: This brushless impact wrench has 4 different stages of electronically selected powers to choose from. This allows you to have a range of actions for a range of tasks for full efficiency.

Product Specifications:

DHP492Z Combi Drill

• Voltage: 18 V
• No load speed: 0 - 550 / 2100 min⁻¹
• Max. fastening torque Hard/Soft: 130 / 65 Nm 
• Max Torque: 141 Nm 
• Torque setting: 21
• Impacts per Minute (IPM): 0 - 8250 / 31500 min⁻¹
• Max. Drilling Diameter in Masonry: 16 mm
• Max. Drilling Diameter in Steel: 13 mm
• Drilling Capacity Wood (Auger Bit): 50 mm
• Drilling Capacity Wood (Self-feed bit): 76 mm
• Drilling Capacity Flat bit: 40 mm
• Drilling Capacity Hole Saw: 152 mm
• Driving Shank: 1/2"-20UNF "
• Drill Chuck Capacity: 1,5 - 13 mm
• Vibration Level, Drilling into metal: ≤ 2,5 m/s²
• Vibration Uncertainty (K Factor), Drilling into metal: 1,5 m/s²
• Vibration Level, Impact Drilling into Concrete: 8,6 m/s²
• Vibration Uncertainty (K Factor), Impact Drilling into Concrete: 1,5 m/s²
• Sound Power Level (LWA): 95 dB(A)
• Sound Pressure Level (LpA): 87 dB(A)
• Noise Uncertainty (K Factor): 3 dB(A)
• Product Dimensions (L x W x H): 180 x 81 x 265 mm
• Tool weight with battery: 2,3 - 2,7 kg
• Product net weight: 1,7 kg

DTW300Z Impact Wrench

• Voltage:  18 V
• Max Fastening Torque Impact Drill: 100 / 160 / 210 / 330 Nm
• No load speed: 0 - 1000 / 1800 / 2600 / 3200 min⁻¹
• Impacts per Minute (IPM): 0 - 1800 / 2600 / 3400 / 4000 min⁻¹
• Drive Square: 1/2 "
• Tightening Capacity Standard Bolt: M10 - M20 
• Tightening Capacity High Tensile Bolt: M10 - M16
• Sound Power Level (LWA): 108 dB(A)
• Sound Pressure Level (LpA): 97 dB(A)
• Noise Uncertainty (K Factor): 3 dB(A)
• Tool weight with battery: 1,5 - 1,8 kg
• Product Dimensions (L x W x H): 144 x 81 x 246 mm
• Nut-busting torque: 580 Nm
• Battery Chemistry (Ni-Cd / Ni-MH / Li-ion): Li-ion
• Product net weight: 1,2 kg