TREND Bearing guided classic cutter | 46/30X1/2TC

Trend 46/30X1/2TC bearing-guided classic router cutter, 4mm radius (1/2" shank)

The Trend 46/30X1/2TC bearing-guided classic cutter is a router cutter designed to help produce a guided profile cut, with the bearing running against an edge for controlled shaping. It’s a practical choice for workshop and site use where a consistent profile is needed without setting up a separate guide.

This Trend bearing-guided cutter is supplied with two bearings, allowing you to change the profile by fitting a larger bearing and adjusting the depth. The larger bearing is designed to remove the bottom quirk.

Key Features

• Bearing guided: Helps follow the workpiece edge for controlled, consistent routing without a separate guide.
• Changeable profile: Profile can be altered by fitting the larger bearing and varying the cut depth.
• Larger bearing option: The larger bearing is designed to remove the bottom quirk.
• 4mm radius: Suitable for creating a classic rounded profile detail.
• 1/2" shank: Fits routers with a 1/2" collet for secure cutter holding.

Specifications at a glance

Suitable applications

• Edge profiling where the bearing can run directly on the workpiece edge for guidance.
• Creating a classic rounded profile with a 4mm radius using a router with a 1/2" collet.
• Jobs where an alternative guided profile is required by switching to the larger supplied bearing and adjusting depth.