Self-guiding trimmers with bearings mounted on end of cutter.
For trimming plastic or plywood overlay.
For copy profiling, use the bearing to follow a template or base edge of board.
An approximate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Downcut to prevent breakout on veneer.
Specifications:
Diameter=19.1 mm
C=25 mm
B=19.1 mm
Angle=90 degrees
Overall Length=79 mm
Shank Diameter=1/2 inch
Shear=5 degrees
Show
Features
Self-guiding trimmers with bearings mounted on end of cutter.
For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board.
An approximate 3mm overlap should be left before copy profiling.
When using plastic laminate adhesive to dry before trimming.
This avoids clogging the guide bearing. Refs. T46/1, 46/2 and 46/20 are downcut to prevent breakout on veneer.
Ref. 46/211 has a sleeved bearing to allow for regrinds in case of resharpening.
Show
About brand
Trend is a well established company that has been designing and developing router technologies and time saving solutions for tradespeople since 1955. During this time, they have built a recognised brand with a strong and well respected reputation for high quality and innovation. The Trend brand is built/designed to appeal across a range of professions and trades and also within the Craft or DIY market, with products focusing across these key areas.