TREND Routabout Jig 22mm x 1/2" Shank | RBT/4

Trend RBT/4 Routabout Jig for 22mm Chipboard Floors (1/2" Shank)

Trend RBT/4 is a routabout jig designed to cut a neat access opening in chipboard flooring so you can reach pipes and cables quickly and reinstate the cut-out section afterwards. Built for trade use, it’s a practical routing accessory for builders, plumbers and electricians working on new builds or refurbishments.

Designed for 22mm chipboard (and similar boards), the RBT/4 helps you cut only the thickness of the floorboard to reduce waste and keep the finished floor looking tidy.

Key Features

• Fast floor access: Cuts a 250mm opening to help reach services beneath chipboard floors quickly.
• Made-good finish: Cuts only the thickness of the board so the removed piece can be reused to reinstate the floor.
• Designed for 22mm flooring: Intended for new or existing 22mm chipboard or similar floor panels.
• Plunge router use: Works with a plunge router rated at 750W or above for controlled cutting.
• 1/2" shank: Built around a 1/2" shank set-up for compatibility with suitable routers.
• Load-rated repair: Max. load capacity rated up to 200kg when made good.

Specifications at a glance

Suitable applications

• Creating access points for plumbing and electrical work beneath chipboard or similar floors.
• Maintenance and retrofit work where a neat, reinstatable opening is required.
• Trade use by builders, plumbers and electricians working on domestic and commercial interiors.