TREND Slotter 2.0mm kerf 1/4 bore | SL/E

Trend SL/E TCT Slotter Cutter, 40mm Diameter (2.0mm Kerf, 1/4" Bore)

Trend SL/E is a TCT slotter cutter designed for routing clean, consistent grooves and slots, with long-life cutting performance when working on abrasive materials.

With a 40mm diameter and 2.0mm kerf, this slotter is a practical choice for joinery and workshop routing tasks where a controlled-width cut is required. Model SL/E uses a 1/4" bore to suit compatible arbors.

Key Features

• TCT cutting grade: Designed for long service life, particularly when cutting abrasive materials.
• 2.0mm kerf: Produces a narrow slot for groove work where a controlled cutter width is needed.
• 40mm diameter: A versatile size for general slotting and grooving applications.
• 2-tooth design: Simple, effective geometry for routing slots and grooves.
• Arbor and bearing guided use: Works with a suitable bearing to help govern depth of cut when set up correctly.

Specifications at a glance

Suitable applications

• Routing grooves and slots in abrasive sheet materials and timber-based boards.
• Joinery and workshop routing tasks where a 2.0mm slot width is required.
• Set-ups using an arbor and bearing to help govern depth of cut.