Mon - Fri 8:00 Am - 4:00 Pm
Saturday 8:00 Am - 1:00 Pm
Unit 9, Holdom Avenue, Saxon Park, Milton Keynes, MK1 1QU
TREND Varijig Tenon & Grooving Jig | VJS/TG/JIG
Trend VJS/TG/JIG Varijig tenon & grooving router jig (400mm working length)
The Trend VJS/TG/JIG Varijig tenon & grooving jig is a routing jig designed to help cut straight grooves and tenons with controlled positioning for joinery and panel work. It’s a practical choice for woodworkers and installers who want repeatable results when trenching, grooving and crosscutting using a plunge router.
VJS/TG/JIG features an adjustable frame for setting groove width, plus sliding stops to control groove length. The frame edge can also be used as a guide for trimming a panel square with a router.
Key Features
- Grooves & tenons with a router: Supports accurate joinery work by guiding the cut for consistent results.
- Crosscut guiding capability: Can be used to crosscut boards with a router or a circular saw.
- Adjustable frame: Allows narrower or wider grooves to be routed, with up to 70mm adjustment (dependent on router base diameter).
- Sliding length stops: Two sliding stops help set and repeat groove length.
- Panel trimming guide edge: The frame edge can be used as a guide to trim a panel square with a router.
- Spelch block facility: Squaring butt can accept a spelch block to help achieve a full-length groove.
- Guide bush compatibility: Suitable for any plunge router fitted with a guide bush with a minimum 8mm projection.
Specifications at a glance
Suitable applications
- Routing straight grooves and trenches for joinery and cabinetry work.
- Cutting tenons with controlled length and positioning.
- Trimming panels square using the frame edge as a guide.
- Crosscutting boards when using a router or circular saw with the jig as a guide.
Comes with
- Trend Varijig tenon & grooving jig frame
- Two sliding stops
- Fixing screws (for spelch block facility)
Technical specification table
| Brand | Trend |
|---|---|
| Model | VJS/TG/JIG |
| Product type | Tenon & grooving router jig |
| Working length | 400mm |
| Guide bush compatibility | For plunge routers fitted with a guide bush with minimum 8mm projection |
| Width adjustment (max.) | 70mm (dependent on router base diameter) |
| Working length basis | Based on 30mm guide bush and 12mm diameter cutter |
| Max. diameter (without end stops) | 412mm |
| Max. diameter (with one end stop) | 397mm |
| Max. diameter (with two end stops) | 382mm |
| Max. working width using end stops | 18mm (with 12mm diameter cutter) |
| Weight | 1.88kg |
| Router included | No |
Trend is a well established company that has been designing and developing router technologies and time saving solutions for tradespeople since 1955. During this time, they have built a recognised brand with a strong and well respected reputation for high quality and innovation. The Trend brand is built/designed to appeal across a range of professions and trades and also within the Craft or DIY market, with products focusing across these key areas.
- In stock
- SKU:VJS/TG/JIG
- 2-3 WORKING DAYS DELIVERY ONLY
PAYDAY EXTRA SAVINGS
Payday promo codes
Until the end of the promotion
